MAX793TCPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 62μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.08mA |
| Threshold Voltage | 3.075V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX793TCPE+ Overview
There are 16 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 2 channels that can be found. There are DIP functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. Through Hole mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 16 pins in it. This power management has 16 pins. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. There is a supply current of 62μA for the power management. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate.
MAX793TCPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
62μA operating supply current
MAX793TCPE+ Applications
There are a lot of Maxim Integrated MAX793TCPE+ Voltage Supervisors applications.
- DC stabilized power supply module
- Consumer electronics
- Stable power system
- Unattended substation automation
- Multi-voltage system
- Utility meter
- Computer applications
- Battery cars
- DSP
- Smart meter
