MAX793TEPE+
| Parameters | |
|---|---|
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX793 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 62μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.075V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.08mA |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
MAX793TEPE+ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tube. Please refer to this PMIC for 1 functions. There are 2 channels available on this supervisor, and each channel has a different function. In this IC management you will find 16-DIP (0.300, 7.62mm) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. When 3.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Using Through Hole, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. A total of 16 pins are located on this power management. There are 16 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Through HoleThe supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 62μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX793, which is the base power ics number. It is necessary to have 3.3/5V volts of power in order for this voltage supervisor to operate.
MAX793TEPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
62μA operating supply current
MAX793TEPE+ Applications
There are a lot of Maxim Integrated MAX793TEPE+ Voltage Supervisors applications.
- Solar power charger
- Important electronics for automotive protection
- Data storage applications
- Detection of phase sequence
- Functional modules
- Power distribution systems of operating room
- Smartphones
- Low voltage/high power - AI, GPU
- Radar
- Consumer electronics
