MAX794CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX794 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 62μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.08mA |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX794CPE+ Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tube-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. There are 2 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of 16-DIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. During the reflow process, a peak temperature of 260 is specified for the package. During operation, the power ic is supplied with a voltage of 3.3V. Power ics operate at 1 supply voltages. The mount is attached to Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 16 pins on IC management. Power managment ic pin count is 16. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. There is a supply current of 62μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX794, the base power ics number. The voltage supervisor requires a power source of 3/5V volts in order to work correctly.
MAX794CPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
62μA operating supply current
MAX794CPE+ Applications
There are a lot of Maxim Integrated MAX794CPE+ Voltage Supervisors applications.
- Medical-specific isolation transformer
- Magnetic resonance imaging
- Telecommunications equipment
- Display equipment
- Sensitive sensors
- Analog circuit
- Utility meter
- Rechargeable batteries
- Consumer electronics
- Medical-specific insulation monitor
