MAX794EPE+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 62μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.08mA |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX794EPE+ Overview
There are 16 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tube. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 2 channels. IC management is packaged as a DIP package. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3V. IC management is possible to find a succession of 1 voltages that have been checked. Using Through Hole, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 16 pins in it. 16 pins are present on the power management system. It is recommended that Vsup should not be less than 1.1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. There is a supply current of 62μA for the power management. To be able to work, this power management requires 3/5V volts of power.
MAX794EPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
62μA operating supply current
MAX794EPE+ Applications
There are a lot of Maxim Integrated MAX794EPE+ Voltage Supervisors applications.
- Satellite navigation
- Cloud computing
- Transformer load monitoring equipment
- External alarm
- Embedded computing
- Display equipment
- Computer applications
- FPGA design
- Power distribution systems of ICU
- Automotive permanent magnet synchronous motors
