MAX795RCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX795 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 49μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX795RCPA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tube model. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 2 channels. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. IC management is specified that the package peak reflow temperature should be 260. Manage ics operate at 3V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 8 pins. 8 pins are on the supervisor. IC management can only work with a supply voltage of 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Through Hole mounting type is recommended. We recommend setting the supervisors to 0°C~70°C TA degrees. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 49μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX795, the base power ics number. The power management must be powered by 3/5V volts to function properly.
MAX795RCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
49μA operating supply current
MAX795RCPA+ Applications
There are a lot of Maxim Integrated MAX795RCPA+ Voltage Supervisors applications.
- Rechargeable batteries
- Detection of phase imbalance
- Linux and server computing
- Analog circuit
- Consumer electronics
- Important electronics for automotive safety
- Medical-specific isolation transformer
- Radar
- Urban rail transit weak current power monitoring
- Important electronics for automotive protection
