MAX795SCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 49μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.07mA |
| Threshold Voltage | 2.925V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX795SCPA+ Overview
It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tube. For your reference, this IC power includes a list of 1 functions. Power management consists of 2 channels, each of which can be used independently. There are PDIP functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3.3V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Through Hole. The power management belongs to the Power Management Circuits subcategory. 8 pins are present in total in this power management. There are 8 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. There is a 49μA supply current present in the power management. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly.
MAX795SCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
49μA operating supply current
MAX795SCPA+ Applications
There are a lot of Maxim Integrated MAX795SCPA+ Voltage Supervisors applications.
- Electronics installed in the vehicle
- emergency room
- Microprocessor system
- Utility meter
- Medical-specific insulation monitor
- Network equipment
- Efficient information transmission
- Medical-specific isolation transformer
- Power distribution systems of operating room
- Cloud computing
