MAX795SCSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | MAX795 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 49μA |
| Nominal Supply Current | 35μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX795SCSA+ Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tube way. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 2 channels that can be found. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3.3V. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. 8 pins are present on the power management system. IC management can only work with a supply voltage of 1V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There is a 49μA supply current present in the power management. It is always advisable to use MAX795, the base supervisor number, when searching for similar PMICs from the manufacturer. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly.
MAX795SCSA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
49μA operating supply current
MAX795SCSA+ Applications
There are a lot of Maxim Integrated MAX795SCSA+ Voltage Supervisors applications.
- Medical-specific isolation transformer
- Leakage protection
- Insulation fault location system
- Detection of phase loss
- Leakage current detection
- Telecommunications equipment
- Automotive power systems
- Multi-voltage system
- Electric heating appliances
- Battery-powered equipment
