MAX795TEPA+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 49μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.07mA |
| Threshold Voltage | 3.075V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX795TEPA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. Packaged in a Tube-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. This power management is made up of 2 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of PDIP functions. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. By Through Hole, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 8 pins on power management. Pin count of the power management is 8. It is recommended that Vsup should not be less than 1.1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. As far as the supply current of the power management is concerned, it is 49μA. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly.
MAX795TEPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
49μA operating supply current
MAX795TEPA+ Applications
There are a lot of Maxim Integrated MAX795TEPA+ Voltage Supervisors applications.
- Battery cars
- Military communications
- Automotive permanent magnet synchronous motors
- Urban rail transit weak current power monitoring
- Consumer electronics
- Functional modules
- Microprocessor system
- Data storage applications
- Radio
- Refrigeration
