MAX797CSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALTERNATE REGULATING VOLTAGE = 3.3; LOW NOISE MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX797 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Control Features | Enable, Pulse Skipping, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck, Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 96% |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX797CSE+ Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tube surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 4.5V~30V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a 0°C~70°C TA dc switcher. Using this switching controller, it is possible to switch at 150kHz 300kHz. A generalization of dc dc regulator can be made using Surface Mount. DCDC regulator is controlled efficiently by Enable, Pulse Skipping, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 16. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. You can find other relevant dc to dc converter ics by searching "MAX797". Total pins of switching converter are 16. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. Test statistics indicate DC regulator outputs 5.1V voltage. It should be fully noted that the dc to dc regulator only accepts 30V input voltage at most. In most cases, the output current of the dc dc regulator will be 10A, so note that when you start the project. The switching controller works at a frequency of 300kHz. DC to DC voltage regulator has a value of ALTERNATE REGULATING VOLTAGE = 3.3; LOW NOISE MODE to better satisfy the need.
MAX797CSE+ Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Pulse Skipping, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz
ALTERNATE REGULATING VOLTAGE = 3.3; LOW NOISE MODE
MAX797CSE+ Applications
There are a lot of Maxim Integrated MAX797CSE+ DC to DC converter applications.
- Grinders
- Magnetohydrodynamic power
- Injection molding machinery
- Arc suppression circuits
- Refrigerators of central air conditioners
- Smoke prevention equipment
- Hydro power
- Electric heating, lighting
- Hydraulic presses
- Machining centers
