MAX797CSE-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Frequency | 300kHz |
| Base Part Number | MAX797 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~30V |
| Quiescent Current | 50μA |
| Control Features | Enable, Pulse Skipping, Soft Start |
| Topology | Buck, Boost, Flyback |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Max Input Voltage | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX797CSE-T Overview
This switching controller fits most application requirements since it is packaged in a 16-SOIC (0.154, 3.90mm Width) package. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tape & Reel (TR) surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~30V voltage are supplied and operated. Suitable for working in an dc switcher that has a 0°C~70°C TA. Using this switching controller, it is possible to switch at 150kHz 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. Enable, Pulse Skipping, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 16 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. Searching "MAX797" will return other relevant dc to dc converter ics. Switching converter is a type of Switching Regulator or Controllers in particular. As determined by the test statistics, the output voltage of DC regulator is 5V. In most cases, the output current of the dc dc regulator will be 10A, so note that when you start the project. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at a frequency of 300kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 30V. DC switchings that are dormant use 50μA. In order to limit the voltage of a dc switcher whose maximum input voltage is 30V, it must be limited by the user. In order to use a 4.5V voltage supply, switching controller is necessary to have one. The dc switcher will not provide an output current greater than 10A.
MAX797CSE-T Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Pulse Skipping, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz
MAX797CSE-T Applications
There are a lot of Maxim Integrated MAX797CSE-T DC to DC converter applications.
- CNC system
- Pipe bending machines
- Computer-related products
- Electrical distribution systems
- Sensitive electronic devices
- Arc suppression circuits
- seismic instrument power circuits
- Flaw detection equipment
- Network technology
- Boring machines
