MAX797HESE+T
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | MAX797 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 5V~30V |
| Control Features | Enable, Pulse Skipping, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 150kHz 300kHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 330kHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
MAX797HESE+T Overview
As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. dc motor controller is suitable for 1 output generation. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 5V~30V. Suitable for a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 150kHz 300kHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Enable, Pulse Skipping, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 16 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 15V. MAX797 can be searched for other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. DC regulator outputs 5V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 330kHz for this dc regulators. It is suggested that users apply 30V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Because the dc switcher's maximum input voltage is 40V users must limit the voltage accordingly. There must be a 4.5V supply voltage. The dc switcher will not provide an output current greater than 10A.
MAX797HESE+T Features
Transistor Driver Outputs
Switching Frequency: 150kHz 300kHz
Enable, Pulse Skipping, Soft Start
PULSE WIDTH MODULATION
MAX797HESE+T Applications
There are a lot of Maxim Integrated MAX797HESE+T DC to DC converter applications.
- Remotely powered electric motors
- Computed tomography (CT)
- Computer monitoring equipment of building
- Radio equipment
- Combined machine tools
- Gear/thread machining machines
- Die casting equipment
- Laboratories
- Elevator lighting
- Smart grid
