MAX800LCSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Base Part Number | MAX800 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.55V |
| Max Reset Threshold Voltage | 4.7V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.7V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX800LCSE+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. Packaging is in the form of a Tube. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 16-SOIC (0.154, 3.90mm Width) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 4.75V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. The power management system can be categorized as a Power Management Circuits chip. A total of 16 pins are located on this power management. There are 16 pins on the power managment ic. IC management can only work with a supply voltage of 0V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to 0°C~70°C TA degrees. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 100μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX800, the base power ics number. A power supply of 5V watts is required for the operation of this power management. The maximum supply temperature that PMIC chip can work with is 100μA.
MAX800LCSE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX800LCSE+ Applications
There are a lot of Maxim Integrated MAX800LCSE+ Voltage Supervisors applications.
- Fire equipment power monitoring system
- Power distribution systems of CCU
- Display equipment
- Sensitive sensors
- Automotive power systems
- DC stabilized power supply module
- Radar
- Leakage current detection
- Low voltage/high power - AI, GPU
- Multi-voltage system
