MAX800MCPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX800 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.3V |
| Max Reset Threshold Voltage | 4.45V |
| Undervoltage Threshold | 4.3V |
| Overvoltage Threshold | 4.45V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX800MCPE+ Overview
Power management is mounted through 16 terminals. Packaged in a Tube-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find 16-DIP (0.300, 7.62mm) functions for your reference. There are a lot of similarities between this IC power and other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 4.5V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Through Hole mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 16 pins that are attached to IC management. This power management has 16 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Through Hole. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. The power management's supply current is 100μA. A similar IC managements number of the manufacturer can always be found by using MAX800, the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature voltage supervisor can handle is 100μA.
MAX800MCPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX800MCPE+ Applications
There are a lot of Maxim Integrated MAX800MCPE+ Voltage Supervisors applications.
- Important electronics for automotive safety
- Electric heating appliances
- Power distribution systems of CCU
- Network equipment
- Household appliances
- Efficient information transmission
- Precision measurement
- Urban rail transit weak current power monitoring
- Power distribution systems of operating room
- Radio
