MAX800MCSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | MAX800 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | YES |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.3V |
| Max Reset Threshold Voltage | 4.45V |
| Undervoltage Threshold | 4.3V |
| Overvoltage Threshold | 4.45V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX800MCSE+ Overview
Power management is mounted through 16 terminals. Packaged in a Tube-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of 16-SOIC (0.154, 3.90mm Width) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. As specified in the package specification, the peak reflow temperature of the package is set at 260. Manage ics operate at 4.5V supply voltages. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 16 pins on power management. Pin count of the power management is 16. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to 0°C~70°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. There is a 100μA supply current present in the power management. It is always advisable to use MAX800, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The maximum supply temperature voltage supervisor can handle is 100μA.
MAX800MCSE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX800MCSE+ Applications
There are a lot of Maxim Integrated MAX800MCSE+ Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Battery cars
- Electronics installed in the vehicle
- Microprocessor system
- DC stabilized power supply module
- Household appliances
- Detection of phase loss
- Important electronics for automotive protection
- Transformer load monitoring equipment
- Medical-specific insulation monitor
