Parameters |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
0V |
Operating Supply Current |
100μA |
Max Supply Current |
100μA |
Adjustable Threshold |
YES |
Watchdog Timer |
Yes |
Reset |
Active High/Active Low |
Voltage - Threshold |
4.4V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Min Reset Threshold Voltage |
4.3V |
Max Reset Threshold Voltage |
4.45V |
Undervoltage Threshold |
4.3V |
Overvoltage Threshold |
4.45V |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2008 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Battery Backup Circuit |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
533mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
MAX800 |
Output |
Open Drain, Push-Pull |
MAX800MCUE+ Overview
This power management consists of 16 mounting terminals on which it can be mounted. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for 16-TSSOP (0.173, 4.40mm Width) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 4.5V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 16 pins on IC management. This power management has 16 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. Supplied with a operating current of 100μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX800, which is the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. The power management can work with a maximum supply temperature of 100μA.
MAX800MCUE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
100μA operating supply current
MAX800MCUE+ Applications
There are a lot of Maxim Integrated MAX800MCUE+ Voltage Supervisors applications.
- Microprocessor system
- Leakage protection
- Computer applications
- Electrical fire monitoring system
- Automotive power systems
- Data storage applications
- Microcontroller system
- Important electronics for automotive safety
- Medical-specific insulation monitor
- Power distribution systems of infant care room