MAX801MCPA+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX801 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 68μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.425V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.35V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.35V |
| Overvoltage Threshold | 4.5V |
| Reset Delay Time | 200 ms |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX801MCPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tube-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. There are a lot of similarities between this IC management and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Through Hole. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 8 pins. This power management system has 8 pins. It is recommended that Vsup should not be less than 0V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: 0°C~70°C TA. In order to maintain a stable supply current for the power management, 68μA is the recommended value. As well as this, there are other features to mention such as [0], for example. For similar manage ics search of the manufacturer, you can always refer to MAX801, the base PMIC number. There is a requirement for 5V power to power this power management.
MAX801MCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
68μA operating supply current
MAX801MCPA+ Applications
There are a lot of Maxim Integrated MAX801MCPA+ Voltage Supervisors applications.
- Fire equipment power monitoring system
- Smartphones
- Urban rail transit weak current power monitoring
- Detection of phase loss
- Automotive power systems
- DSP
- Military electronics
- Set top box
- Power communication system
- Microprocessor system
