MAX801MCSA+
| Parameters | |
|---|---|
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.425V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.35V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.35V |
| Overvoltage Threshold | 4.5V |
| Reset Delay Time | 200 ms |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | WATCHDOG TIMER, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX801 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 68μA |
MAX801MCSA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tube. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. When 5V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. This power management has 8 pins. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. There is a 68μA supply current present in the power management. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX801, which is the base power ics number. A power supply of 5V watts is required for the operation of this power management.
MAX801MCSA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
68μA operating supply current
MAX801MCSA+ Applications
There are a lot of Maxim Integrated MAX801MCSA+ Voltage Supervisors applications.
- Precision measurement
- Microcontroller system
- Military communications
- Radio
- Military electronics
- Leakage current detection
- Insulation fault location system
- Automotive power systems
- Analog circuit
- Detection of phase loss
