MAX801NCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | WATCHDOG TIMER, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 68μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.65V |
| Threshold Voltage | 4.575V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.65V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 200 ms |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX801NCPA+ Overview
It is mounted through 8 terminals on the power management. Tube-packaging is used. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find PDIP functions for your reference. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 5V is applied to the power ic, it conducts. Through Hole mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the power managment ic. It is recommended that Vsup should not be less than 0V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. In order to maintain a stable supply current for the power management, 68μA is the recommended value. In addition, IC management are other features such as [0], to mention only a few. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system.
MAX801NCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
68μA operating supply current
MAX801NCPA+ Applications
There are a lot of Maxim Integrated MAX801NCPA+ Voltage Supervisors applications.
- Kitchen appliances
- Medical-specific isolation transformer
- Multi-voltage system
- Automotive power systems
- WiFi router
- Battery cars
- Sensitive sensors
- FPGA design
- Computer applications
- Military electronics
