MAX802MCSA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX802 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 200μA |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX802MCSA Overview
It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tube. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. There are a lot of similarities between this IC power and other Battery Backup Circuit products. During the reflow process, a peak temperature of 245 is specified for the package. The supervisor is always powered by a 5V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 200μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX802, which is the base power ics number. There is a requirement for 5V power to power this power management. At most, voltage supervisor can operate at a supply temperature of 350μA.
MAX802MCSA Features
Battery Backup Circuit type
Minimum supply voltage of 1V
200μA operating supply current
MAX802MCSA Applications
There are a lot of Maxim Integrated MAX802MCSA Voltage Supervisors applications.
- Efficient information transmission
- Low voltage/high power - AI, GPU
- Analog circuit
- Personal computers
- Medical-specific isolation transformer
- Multi-voltage system
- Kitchen appliances
- Microprocessor system
- Magnetic resonance imaging
- Electrical fire monitoring system
