MAX802TCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | DIP |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.14V |
| Threshold Voltage | 3.075V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.14V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX802TCPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tube. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for DIP functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 1. Through Hole mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 8 pins are located on this power management. Supply voltage (Vsup) should be at least 1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). There is a supply current of 50μA for the power management. To be able to work, this power management requires 3/5V volts of power.
MAX802TCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX802TCPA+ Applications
There are a lot of Maxim Integrated MAX802TCPA+ Voltage Supervisors applications.
- Set top box
- Automotive permanent magnet synchronous motors
- Automotive power systems
- Medical-specific isolation transformer
- Important electronics for automotive protection
- Leakage protection
- Low voltage/high power - AI, GPU
- Detection of phase sequence
- Rechargeable batteries
- Detection of phase imbalance
