MAX803SEXR+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX803 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 17μA |
| Nominal Supply Current | 24μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.06mA |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX803SEXR+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes SC-70, SOT-323 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 3.3V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 3 pins that are attached to IC management. 3 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. It is estimated that the voltage supervisor's supply current is 17μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX803, which is the base power ics number.
MAX803SEXR+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
17μA operating supply current
MAX803SEXR+T Applications
There are a lot of Maxim Integrated MAX803SEXR+T Voltage Supervisors applications.
- Kitchen appliances
- Power distribution systems of infant care room
- Refrigeration
- Battery cars
- Functional modules
- Low voltage/high power - AI, GPU
- Battery-powered equipment
- Efficient information transmission
- Microprocessor system
- Power distribution systems of CCU
