Parameters |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Tin (Sn) |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MAX803 |
Output |
Open Drain or Open Collector |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.2V |
Operating Supply Current |
800nA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3.08V |
Number of Voltages Monitored |
1 |
Reset Timeout |
20ms Minimum |
Halogen Free |
Halogen Free |
Supply Current-Max (Isup) |
0.0025mA |
Min Reset Threshold Voltage |
3.04V |
Max Reset Threshold Voltage |
3.11V |
Threshold Voltage |
+3.08V |
Undervoltage Threshold |
3.04V |
Overvoltage Threshold |
3.11V |
Height |
900μm |
Length |
2.2mm |
Width |
1.35mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-70, SOT-323 |
Number of Pins |
3 |
Operating Temperature |
-40°C~105°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2008 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
MAX803SQ308D2T1G Overview
This power management consists of 3 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. Please refer to power management for SC-70, SOT-323 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 3 pins on IC management. Pin count of the power management is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 800nA volt supply current. It is always advisable to use MAX803, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX803SQ308D2T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
MAX803SQ308D2T1G Applications
There are a lot of ON Semiconductor MAX803SQ308D2T1G Voltage Supervisors applications.
- Medical-specific isolation transformer
- Insulation fault location system
- Unattended substation automation
- Detection of phase loss
- Leakage current detection
- Solar power charger
- Utility meter
- Efficient information transmission
- DSP
- Digitally controlled LDO regulators circuit