MAX804SCPA+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX804 |
| Output | Open Drain, Open Drain |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 3.02V |
| Undervoltage Threshold | 2.88V |
| Overvoltage Threshold | 3.02V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
MAX804SCPA+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tube model. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. In total, it has 8 pins on IC management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Open Drain. It is estimated that the voltage supervisor's supply current is 50μA. You can always use MAX804, the base supervisor number, to search for similar PMICs of the manufacturer. The voltage supervisor requires a power source of 3/5V volts in order to work correctly.
MAX804SCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX804SCPA+ Applications
There are a lot of Maxim Integrated MAX804SCPA+ Voltage Supervisors applications.
- Detection of phase sequence
- Personal computers
- Sensitive sensors
- Display equipment
- DC stabilized power supply module
- Linux and server computing
- Electric heating appliances
- Network equipment
- Smart meter
- Solar power charger
