banner_page

MAX804SCSA+

8 Terminals 8-Pin MAX804 Voltage supervisor1 Channels Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX804SCSA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 308
  • Description: 8 Terminals 8-Pin MAX804 Voltage supervisor1 Channels Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Number of Terminations 8
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish MATTE TIN
Subcategory Power Management Circuits
Max Power Dissipation 471mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Base Part Number MAX804
Output Open Drain, Open Drain
Pin Count 8
Power Supplies 3/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 50μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 2.925V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Supply Current-Max (Isup) 0.05mA
Min Reset Threshold Voltage 2.88V
Max Reset Threshold Voltage 3.02V
Undervoltage Threshold 2.88V
Overvoltage Threshold 3.02V
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)

MAX804SCSA+ Overview


A total of 8 terminals are used to mount this power management. Power management is packaged in a Tube way. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. We recommend setting the supervisors to 0°C~70°C TA degrees. While this power management is operating, it will output Open Drain, Open Drain as the output voltage. There is a 50μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MAX804. To be able to work, this power management requires 3/5V volts of power.

MAX804SCSA+ Features


Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current

MAX804SCSA+ Applications


There are a lot of Maxim Integrated MAX804SCSA+ Voltage Supervisors applications.

  • WiFi router
  • Detection of phase imbalance
  • Urban rail transit weak current power monitoring
  • External alarm
  • Automotive permanent magnet synchronous motors
  • Computer applications
  • Battery cars
  • Smart meter
  • Detection of phase loss
  • Low voltage/high power - AI, GPU

Write a review

Note: HTML is not translated!
    Bad           Good