MAX805LCSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX805 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.35mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX805LCSA+ Overview
As you can see, this power management is mounted through 8 terminals. Packaging is in the form of a Tube. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 8 pins. There are 8 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: 0°C~70°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. There is a supply current of 200μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX805, the base power ics number. To be able to work, this power management requires 5V volts of power.
MAX805LCSA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
200μA operating supply current
MAX805LCSA+ Applications
There are a lot of Maxim Integrated MAX805LCSA+ Voltage Supervisors applications.
- Radio
- Magnetic resonance imaging
- Rechargeable batteries
- Medical-specific isolation transformer
- Detection of phase imbalance
- Detection of phase loss
- Automotive power systems
- Battery-powered equipment
- Display equipment
- Low voltage/high power - AI, GPU
