MAX805RCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX805 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.72V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.72V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX805RCPA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. There is a Tube-packaging method applied to IC management. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 1-voltage supply. The power management is mounted by a Through Hole-axis. The power management belongs to the Power Management Circuits subcategory. In total, it has 8 pins on IC management. IC management can only work with a supply voltage of 1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleThe temperature of the supervisors should be set to this range: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 50μA is the recommended value. It is always advisable to use MAX805, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 3/5V volts of power.
MAX805RCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX805RCPA+ Applications
There are a lot of Maxim Integrated MAX805RCPA+ Voltage Supervisors applications.
- Household appliances
- emergency room
- Network equipment
- Telecommunications equipment
- Power distribution systems of ICU
- Power distribution systems of operating room
- Data storage applications
- Embedded computing
- Low voltage/high power - AI, GPU
- Detection of phase sequence
