MAX805SCPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX805 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3.02V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3.02V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX805SCPA+ Overview
As you can see, this power management is mounted through 8 terminals. A Tube package is used to package the power management. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Through Hole-axis. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 8. 8 pins make up the power management. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The power management's supply current is 200μA. For similar manage ics search of the manufacturer, you can always refer to MAX805, the base PMIC number. In order to operate this power management, it requires 3/5V volts of power.
MAX805SCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
200μA operating supply current
MAX805SCPA+ Applications
There are a lot of Maxim Integrated MAX805SCPA+ Voltage Supervisors applications.
- Important electronics for automotive safety
- Leakage current detection
- Unattended substation automation
- Automotive permanent magnet synchronous motors
- Data storage applications
- Fire equipment power monitoring system
- Low voltage/high power - AI, GPU
- Automotive power systems
- Refrigeration
- Microprocessor system
