MAX805SEPA+
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Reset | Active High |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MAX805SEPA+ Overview
A total of 8 terminals are used to mount this power management. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 1 is used to conduct the PMIC chip. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The voltage supervisor requires a power source of 3/5V volts in order to work correctly.
MAX805SEPA+ Features
Battery Backup Circuit type
MAX805SEPA+ Applications
There are a lot of Maxim Integrated MAX805SEPA+ Voltage Supervisors applications.
- FPGA design
- Network equipment
- Power communication system
- Medical-specific insulation monitor
- Functional modules
- Kitchen appliances
- Unattended substation automation
- Insulation fault location system
- Digitally controlled LDO regulators circuit
- DVR
