MAX806RCSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX806 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX806RCSA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in a Tube-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes 8-SOIC (0.154, 3.90mm Width) functions for your convenience. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. This power management has 8 pins. Supply voltage (Vsup) should be at least 1V for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during 0°C~70°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. For this power management, there is an 50μA volt supply current. In addition, IC management are other features such as [0], to mention only a few. It is always advisable to use MAX806, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 3/5V volts of power.
MAX806RCSA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX806RCSA+ Applications
There are a lot of Maxim Integrated MAX806RCSA+ Voltage Supervisors applications.
- Fire equipment power monitoring system
- Smart meter
- Telecommunications equipment
- Important electronics for automotive protection
- Power distribution systems of infant care room
- Smartphones
- Leakage current detection
- Power distribution systems of CCU
- Power distribution systems of ICU
- Efficient information transmission
