MAX806SCSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX806 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 3.02V |
| Undervoltage Threshold | 2.88V |
| Overvoltage Threshold | 3.02V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX806SCSA+ Overview
It is mounted through 8 terminals on the power management. A Tube package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. This IC power shares lots of benefits with other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 50μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. For similar manage ics search of the manufacturer, you can always refer to MAX806, the base PMIC number. There is a requirement for 3/5V power to power this power management.
MAX806SCSA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX806SCSA+ Applications
There are a lot of Maxim Integrated MAX806SCSA+ Voltage Supervisors applications.
- Automotive power systems
- Power communication system
- Set top box
- Sensitive sensors
- Radar
- Detection of phase loss
- Insulation fault location system
- Battery-powered equipment
- Embedded computing
- DC stabilized power supply module
