MAX806SCSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX806 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 2.88V |
| Max Reset Threshold Voltage | 3.02V |
| Undervoltage Threshold | 2.88V |
| Overvoltage Threshold | 3.02V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX806SCSA+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. Power management conducts at a voltage of 1. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. 8 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 50μA, this PMIC is capable of fully function as specified. There are other features such as MANUAL RESET OPTION to name a few. It is always advisable to use MAX806, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 3/5V watts is required for the operation of this power management.
MAX806SCSA+T Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX806SCSA+T Applications
There are a lot of Maxim Integrated MAX806SCSA+T Voltage Supervisors applications.
- Fire equipment power monitoring system
- Important electronics for automotive protection
- Embedded computing
- External alarm
- Functional modules
- Power distribution systems of infant care room
- Detection of phase sequence
- Personal computers
- Solar power charger
- Radar
