MAX806TCPA+
| Parameters | |
|---|---|
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.075V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.14V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.14V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX806 |
MAX806TCPA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. It is packaged with Tube. In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. Power management conducts at a voltage of 1. The mount is attached to Through Hole. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 8 pins on power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Mounting type Through Hole is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 50μA for the power management. Power management is also possible to add other features such as MANUAL RESET OPTION to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX806, which is the base power ics number. A power supply of 3/5V watts is required for the operation of this power management.
MAX806TCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current
MAX806TCPA+ Applications
There are a lot of Maxim Integrated MAX806TCPA+ Voltage Supervisors applications.
- Important electronics for automotive protection
- Set top box
- Power distribution systems of CCU
- Leakage current detection
- Military electronics
- External alarm
- Fire equipment power monitoring system
- Sensitive sensors
- DSP
- Multi-voltage system
