MAX806TESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | MANUAL RESET OPTION |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | MAX806 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.075V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.07mA |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.14V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.14V |
| Reset Delay Time | 200 ms |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MAX806TESA+ Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Tube-packaging is used. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 8. This power management has 8 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 50μA. As well as this, there are other features to mention such as [0], for example. A similar IC managements number of the manufacturer can always be found by using MAX806, the base power ics number. To be able to work, this power management requires 3/5V volts of power.
MAX806TESA+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.1V
50μA operating supply current
MAX806TESA+ Applications
There are a lot of Maxim Integrated MAX806TESA+ Voltage Supervisors applications.
- Fire equipment power monitoring system
- Important electronics for automotive safety
- WiFi router
- Power distribution systems of infant care room
- Microprocessor system
- Electronics installed in the vehicle
- Cloud computing
- Detection of phase loss
- Automotive power systems
- Embedded computing
