MAX807LCPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX807 |
| Pin Count | 16 |
| Max Output Current | 250mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 70μA |
| Nominal Supply Current | 70μA |
| Power Dissipation | 762mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.675V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.6V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.6V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX807LCPE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Packaging is in the form of a Tube. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find 16-DIP (0.300, 7.62mm) functions for your reference. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. IC management is specified that the package peak reflow temperature should be 260. When a supply voltage of 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 16. 16 pins are on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 0V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Through Hole mounting type. You should set the supervisor's temperature during 0°C~70°C TA . There is a supply current of 70μA for the power management. It is always advisable to use MAX807, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 5V watts is required for the operation of this power management.
MAX807LCPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current
MAX807LCPE+ Applications
There are a lot of Maxim Integrated MAX807LCPE+ Voltage Supervisors applications.
- Smartphones
- Display equipment
- Detection of phase imbalance
- Stable power system
- Battery cars
- Efficient information transmission
- DVR
- Rechargeable batteries
- Medical-specific insulation monitor
- Medical-specific isolation transformer
