MAX807MEUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.425V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 533mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX807 |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 70μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.575V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.35V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.35V |
| Overvoltage Threshold | 4.5V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX807MEUE+ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. Tube-packaging is used. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes 16-TSSOP (0.173, 4.40mm Width) functions for your convenience. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 16 pins on the board. Power managment ic pin count is 16. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. Supplied with a operating current of 70μA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX807, which is the base power ics number. To operate this power management, you will need at least 5V volts of power.
MAX807MEUE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current
MAX807MEUE+ Applications
There are a lot of Maxim Integrated MAX807MEUE+ Voltage Supervisors applications.
- Military electronics
- Smart meter
- Digitally controlled LDO regulators circuit
- DVR
- Rechargeable batteries
- Display equipment
- Household appliances
- Battery-powered equipment
- Detection of phase loss
- Urban rail transit weak current power monitoring
