MAX807NCPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 16 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.575V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 70μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.65V |
| Threshold Voltage | 4.425V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.65V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX807NCPE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Packaging is in the form of a Tube. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached DIP functions for your reference in this IC power. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Through Hole. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 16 pins on power management. There are 16 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Supplied with a operating current of 70μA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. The voltage supervisor requires a power source of 5V volts in order to work correctly.
MAX807NCPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current
MAX807NCPE+ Applications
There are a lot of Maxim Integrated MAX807NCPE+ Voltage Supervisors applications.
- Insulation fault location system
- Digitally controlled LDO regulators circuit
- Power distribution systems of CCU
- Automotive power systems
- FPGA design
- Electronics installed in the vehicle
- Medical-specific isolation transformer
- DSP
- Magnetic resonance imaging
- Leakage protection
