MAX807NCUE+
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.575V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 533mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX807 |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 70μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.425V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.65V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.65V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
MAX807NCUE+ Overview
A total of 16 terminals are used to mount this power management. It is packaged with Tube. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 16-TSSOP (0.173, 4.40mm Width) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. There is a subcategory called Power Management Circuits for this power management. In total, it has 16 pins on IC management. 16 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. Supplied with a operating current of 70μA, this PMIC is capable of fully function as specified. There are also other features in the software such as [0], just to mention a few. You can always use MAX807, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 5V volts to function properly.
MAX807NCUE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current
MAX807NCUE+ Applications
There are a lot of Maxim Integrated MAX807NCUE+ Voltage Supervisors applications.
- Precision measurement
- Power communication system
- Low voltage/high power - AI, GPU
- Sensitive sensors
- Important electronics for automotive safety
- DSP
- Satellite navigation
- FPGA design
- Urban rail transit weak current power monitoring
- Smart meter
