MAX807NCWE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.575V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 762mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX807 |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 70μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.425V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.65V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.65V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX807NCWE+ Overview
It is mounted through 16 terminals on the power management. There is a Tube-packaging method applied to IC management. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of 16-SOIC (0.295, 7.50mm Width) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 5V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 16 pins in it. There are 16 pins on the supervisor. Supply voltage (Vsup) should be at least 0V for this power management. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. As far as the supply current of the power management is concerned, it is 70μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. To find similar IC managements from the manufacturer, you can always search by MAX807. To be able to work, this power management requires 5V volts of power.
MAX807NCWE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current
MAX807NCWE+ Applications
There are a lot of Maxim Integrated MAX807NCWE+ Voltage Supervisors applications.
- Battery-powered equipment
- Rechargeable batteries
- Set top box
- Magnetic resonance imaging
- Consumer electronics
- Transformer load monitoring equipment
- Leakage current detection
- Dash board
- Computer applications
- External alarm
