MAX807NEPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | MATTE TIN |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.575V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 842mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX807 |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 70μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.425V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.65V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.65V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX807NEPE+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. In terms of packaging, power management follows the Tube model. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a 16-DIP (0.300, 7.62mm) package. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. In a 1 supply voltage, the PMIC chip conducts. Through Hole is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 16 pins on power management. Pin count of the power management is 16. Supply voltage (Vsup) should be at least 0V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. The supply current of the power management is 70μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX807, which is the base power ics number. The power management must be powered by 5V volts to function properly.
MAX807NEPE+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current
MAX807NEPE+ Applications
There are a lot of Maxim Integrated MAX807NEPE+ Voltage Supervisors applications.
- Dash board
- Set top box
- Computer applications
- Household appliances
- DVR
- Electrical fire monitoring system
- Telecommunications equipment
- Network equipment
- Detection of phase imbalance
- DC stabilized power supply module
