MAX808LCSA+
| Parameters | |
|---|---|
| Supply Current-Max (Isup) | 0.09mA |
| Min Reset Threshold Voltage | 4.6V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.6V |
| Overvoltage Threshold | 4.75V |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX808 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 48μA |
| Nominal Supply Current | 48μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.675V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
MAX808LCSA+ Overview
This power management consists of 8 mounting terminals on which it can be mounted. Tube-packaging is used. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 8 pins that are attached to IC management. Pin count of the power management is 8. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. The supply current of the power management is 48μA. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to MAX808, the base PMIC number. The voltage supervisor requires a power source of 5V volts in order to work correctly.
MAX808LCSA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current
MAX808LCSA+ Applications
There are a lot of Maxim Integrated MAX808LCSA+ Voltage Supervisors applications.
- Medical-specific insulation monitor
- Unattended substation automation
- Automotive permanent magnet synchronous motors
- Military communications
- Insulation fault location system
- Power distribution systems of operating room
- emergency room
- Refrigeration
- Cloud computing
- DC stabilized power supply module
