MAX808LEPA+
| Parameters | |
|---|---|
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX808 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 48μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.675V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.09mA |
| Min Reset Threshold Voltage | 4.6V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.6V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
MAX808LEPA+ Overview
There are 8 terminals on this power management that allow it to be mounted. It is packaged with Tube. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. There are a lot of similarities between this IC management and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. Through Hole is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. A total of 8 pins are located on this power management. The pins of the power management system count 8. Supply voltage (Vsup) should be at least 0V for this power management. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The mounting type of the supervisors is Through HoleThis power management is the recommended temperature range for the supervisors: -40°C~85°C TA. There is a supply current of 48μA for the power management. Power management is also possible to add other features such as CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE to name a few. For similar manage ics search of the manufacturer, you can always refer to MAX808, the base PMIC number. The power management must be powered by 5V volts to function properly.
MAX808LEPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current
MAX808LEPA+ Applications
There are a lot of Maxim Integrated MAX808LEPA+ Voltage Supervisors applications.
- Medical-specific insulation monitor
- Unattended substation automation
- Leakage current detection
- Network equipment
- Personal computers
- Microcontroller system
- Kitchen appliances
- Power communication system
- Power distribution systems of infant care room
- Multi-voltage system
