MAX808LESA+
| Parameters | |
|---|---|
| Supply Current-Max (Isup) | 0.09mA |
| Min Reset Threshold Voltage | 4.6V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.6V |
| Overvoltage Threshold | 4.75V |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX808 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 48μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.675V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
MAX808LESA+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Power management is packaged in a Tube way. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 5V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. 8 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Supplied with a operating current of 48μA, this PMIC is capable of fully function as specified. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to MAX808, the base PMIC number. It requires 5V watts of power to operate this voltage supervisor.
MAX808LESA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current
MAX808LESA+ Applications
There are a lot of Maxim Integrated MAX808LESA+ Voltage Supervisors applications.
- Medical-specific insulation monitor
- Power distribution systems of ICU
- Sensitive sensors
- Embedded computing
- Household appliances
- DVR
- Analog circuit
- Kitchen appliances
- Linux and server computing
- Insulation fault location system
