MAX808MCPA+
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 48μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140 ms |
| Supply Current-Max (Isup) | 0.09mA |
| Min Reset Threshold Voltage | 4.35V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | 4.425V |
| Undervoltage Threshold | 4.35V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX808MCPA+ Overview
Power management is mounted through 8 terminals. A Tube package is used to package the power management. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of DIP functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 5V volt supply. Power ics operate at 1 supply voltages. Through Hole is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. In total, it has 8 pins on IC management. Pin count of the power management is 8. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 0V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The power management's supply current is 48μA. Power management is also possible to add other features such as CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE to name a few. To be able to work, this power management requires 5V volts of power.
MAX808MCPA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current
MAX808MCPA+ Applications
There are a lot of Maxim Integrated MAX808MCPA+ Voltage Supervisors applications.
- Smart meter
- Sensitive sensors
- Smartphones
- Display equipment
- Household appliances
- Power distribution systems of infant care room
- Important electronics for automotive protection
- Dash board
- Analog circuit
- Precision measurement
