MAX808NESA+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 471mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX808 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 48μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.575V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.09mA |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.65V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.65V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
MAX808NESA+ Overview
Power management is mounted through 8 terminals. Packaged in a Tube-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 0V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. In order to maintain a stable supply current for the power management, 48μA is the recommended value. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use MAX808, the base supervisor number, when searching for similar PMICs from the manufacturer. There is a requirement for 5V power to power this power management.
MAX808NESA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current
MAX808NESA+ Applications
There are a lot of Maxim Integrated MAX808NESA+ Voltage Supervisors applications.
- Power distribution systems of infant care room
- Leakage current detection
- Kitchen appliances
- Functional modules
- Precision measurement
- Refrigeration
- Unattended substation automation
- Linux and server computing
- Medical-specific insulation monitor
- Smart meter
