Parameters |
Nominal Supply Current |
50μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
4.38V |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Supply Current-Max (Isup) |
0.06mA |
Min Reset Threshold Voltage |
4.31V |
Max Reset Threshold Voltage |
4.45V |
Threshold Voltage |
+4.38V |
Undervoltage Threshold |
4.31V |
Overvoltage Threshold |
4.45V |
Height |
1.02mm |
Length |
3.04mm |
Width |
1.4mm |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~105°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1998 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
320mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX809 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.2V |
Operating Supply Current |
60μA |
MAX809MEUR+T Overview
It is mounted through 3 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. 3 pins are present in total in this power management. Power managment ic pin count is 3. It is recommended that Vsup should not be less than 1.2V for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. As far as the supply current of the power management is concerned, it is 60μA. You can always use MAX809, the base supervisor number, to search for similar PMICs of the manufacturer. It requires 5V watts of power to operate this voltage supervisor.
MAX809MEUR+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
MAX809MEUR+T Applications
There are a lot of Maxim Integrated MAX809MEUR+T Voltage Supervisors applications.
- Kitchen appliances
- Automotive power systems
- Detection of phase imbalance
- Electrical fire monitoring system
- Smartphones
- Satellite navigation
- Battery-powered equipment
- Military electronics
- Display equipment
- Household appliances