MAX809REUR+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MAX809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Power Supplies | 3V |
| Number of Channels | 1 |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 17μA |
| Power Dissipation | 320mW |
| Output Current | 20mA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.05mA |
| Min Reset Threshold Voltage | 2.59V |
| Max Reset Threshold Voltage | 2.66V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.59V |
| Overvoltage Threshold | 2.66V |
| Height | 1.12mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX809REUR+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the power managment ic. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 60μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX809, the base power ics number. It is necessary to have 3V volts of power in order for this voltage supervisor to operate.
MAX809REUR+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
MAX809REUR+T Applications
There are a lot of Maxim Integrated MAX809REUR+T Voltage Supervisors applications.
- Computer applications
- DC stabilized power supply module
- Medical-specific insulation monitor
- Low voltage/high power - AI, GPU
- Detection of phase imbalance
- Radio
- Electric heating appliances
- DSP
- Detection of phase loss
- Smartphones
