MAX809SN293D1T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MAX809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Nominal Supply Current | 2.5μA |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.96V |
| Height | 1.01mm |
| Length | 3.04mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX809SN293D1T1G Overview
Power management is mounted through 3 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. 3 pins are present in total in this power management. This power management system has 3 pins. IC management can only work with a supply voltage of 1.2V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~105°C TJ. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 800nA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX809, which is the base power ics number.
MAX809SN293D1T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
MAX809SN293D1T1G Applications
There are a lot of ON Semiconductor MAX809SN293D1T1G Voltage Supervisors applications.
- Power communication system
- Detection of phase loss
- Important electronics for automotive safety
- Medical-specific insulation monitor
- Medical-specific isolation transformer
- Utility meter
- Computer applications
- Leakage protection
- Display equipment
- Solar power charger
