MAX809SN293D3T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MAX809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Nominal Supply Current | 2.5μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.96V |
| Height | 1.01mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX809SN293D3T1G Overview
It is mounted through 3 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 3.3V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 3 pins are located on this power management. There are 3 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~105°C TJ. During operation, this power management system outputs Push-Pull, Totem Pole. There is a 800nA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by MAX809.
MAX809SN293D3T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
MAX809SN293D3T1G Applications
There are a lot of ON Semiconductor MAX809SN293D3T1G Voltage Supervisors applications.
- Kitchen appliances
- Power distribution systems of CCU
- Data storage applications
- Magnetic resonance imaging
- Battery-powered equipment
- DC stabilized power supply module
- Solar power charger
- Digitally controlled LDO regulators circuit
- External alarm
- DVR
