Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-70, SOT-323 |
Number of Pins |
3 |
Operating Temperature |
-40°C~105°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Tin (Sn) |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MAX809 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.2V |
Operating Supply Current |
800nA |
Nominal Supply Current |
2.5μA |
Adjustable Threshold |
NO |
Reset |
Active Low |
Number of Voltages Monitored |
1 |
Reset Timeout |
140ms Minimum |
Halogen Free |
Halogen Free |
Supply Current-Max (Isup) |
0.0025mA |
Min Reset Threshold Voltage |
4.56V |
Max Reset Threshold Voltage |
4.7V |
Threshold Voltage |
+4.63V |
Undervoltage Threshold |
4.63V |
Overvoltage Threshold |
4.7V |
Height |
900μm |
Length |
2.2mm |
Width |
1.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX809SQ463T1G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC-70, SOT-323 functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 3.3V. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 3 pins. Power managment ic pin count is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~105°C TJ. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 800nA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX809, the base power ics number.
MAX809SQ463T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
MAX809SQ463T1G Applications
There are a lot of ON Semiconductor MAX809SQ463T1G Voltage Supervisors applications.
- Stable power system
- Data storage applications
- Computer applications
- Display equipment
- Microcontroller system
- emergency room
- Military electronics
- Digitally controlled LDO regulators circuit
- Leakage current detection
- Rechargeable batteries