MAX809TTRG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 15 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MAX809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 800nA |
| Nominal Supply Current | 2.5μA |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0025mA |
| Min Reset Threshold Voltage | 3.04V |
| Max Reset Threshold Voltage | 3.11V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.08V |
| Overvoltage Threshold | 3.11V |
| Height | 1.016mm |
| Length | 3.0226mm |
| Width | 1.397mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX809TTRG Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Cut Tape (CT). For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Packages are specified to have an average peak reflow temperature of 260. IC management conducts in a 3.3V-voltage supply. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 3. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~105°C TJ. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 800nA. You can always use MAX809, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX809TTRG Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current
MAX809TTRG Applications
There are a lot of ON Semiconductor MAX809TTRG Voltage Supervisors applications.
- Smartphones
- Power distribution systems of CCU
- Multi-voltage system
- Electric heating appliances
- Functional modules
- Radio
- Microcontroller system
- Medical-specific isolation transformer
- Refrigeration
- Network equipment
